Topaz Precision

A video quality model with a flat price per second. It enlarges a clip two or four times, can raise the frame rate up to 60 and lets you pick an algorithm for the material: ordinary footage, close-up faces, noisy source or old recordings. It does not redraw the picture.

  • No subscription
  • Price shown before you run
  • Refund if a generation fails

Improve quality with Topaz

How it works

  1. Open the “Video editor” tab and pick the “Quality” operation.
  2. Upload a clip or take a finished one from your feed.
  3. Choose Topaz Precision, a ×2 or ×4 factor, an algorithm for your material and, if you want, a frame rate.
  4. Check the price and run it. The result appears as a separate item.

Specifications

What it doesEnlarges a clip 2 or 4 times
AlgorithmsStandard, Faces, Noisy source, Old video
Frame rate24, 30, 48 or 60
Price per second$0.013 up to 720p, $0.026 up to 1080p, $0.078 above
10 seconds up to 1080p$0.26
10 seconds up to 4K$0.78
Final sumrecalculated from the finished file

Good to know

An algorithm for the material

Four modes: “Standard” for footage, screens and graphics, “Faces” for close-ups, “Noisy source” against grain and compression artifacts, and “Old video” for interlaced footage and camera recordings.

Frame rate

A clip can be raised to 24, 30, 48 or 60 frames per second. If you choose nothing, the rate stays as it was.

The price depends on the result

A second costs about $0.013 if the output is up to 720p, $0.026 up to 1080p and $0.078 above that. So ×2 of a small clip is cheap, while ×2 of Full HD already falls into the most expensive level.

Final sum from the finished file

The price before you run is an estimate: if the size of the result is not known in advance, the most expensive level is used. The service recalculates the final sum from the finished file.

Sound

Whether the sound is kept is not confirmed in the catalog. If the improved clip has no track, bring it back with the free “Sound from the clip” button on the finished work page.

Price

The price is counted by seconds of the output clip, and the rate depends on its size: about $0.013 per second up to 720p, $0.026 up to 1080p and $0.078 above. For example, 10 seconds lifted to 1080p cost $0.26, 10 seconds to 4K $0.78, 30 seconds to 4K $2.34. If a generation fails, the money is returned.

FAQ

When should I take Topaz and when SeedVR2?

Topaz is for when the frame rate or an algorithm for faces and old footage matters. SeedVR2 is priced by pixels and is chosen when you need an exact target size.

How much does a 10-second clip cost?

$0.26 if the result comes out up to 1080p, and $0.78 if higher, for example 4K.

Which factor should I pick?

×2 for ordinary clips, ×4 for very small sources. Note that the final price depends on the size of the result, not on the factor.

Will the sound be kept?

This is not confirmed in the catalog. If there is no sound, use the free “Sound from the clip” button.

See also

Home · Ready-made presets